NETGEAR new extender setup can be initiated by following any one method among two, provided by NETGEAR.
These two methods are:
1. Manual method/NETGEAR genie smart Setup/ NETGEAR smart setup
2. Wi-Fi Protected Setup(WPS) method
Steps involved in new extender setup gets varied in both of the above mentioned methods.
For instance, in case of manual method, NETGEAR new extender setup can be launched by launching www.mywifiext.net local webpage.
Whereas in case of WPS method, WPS enabled network router/switch is required to initiate new extender setup.
Thus for launching NETGEAR new extender setup, firstly choose among these methods as per your network compatibility.
If you had selected manual method then you will be required to logged into www.mywifiext.net webpage to launch new extender setup
Whereas in case of WPS method, NETGEAR new extender setup gets completed just by pressing WPS button on network router and NETGEAR extender.
We had taken overview of the NETGEAR new extender setup. Now let’s get deep into it
In this article we are going to discuss various steps involved in launching new extender setup.
User can go for NETGEAR extender setup by either using WPS method or by using manual method.
Manual method uses www.mywifiext.net local webpage to launch NETGEAR installation assistant.
To better understand how all this works, what are steps involved in NETGEAR extender login, let’s start our discussion.
Are you looking for procedure for new extender setup?
If yes, then this article is ideal one to cater your need.
As the discussion proceeds, we will discuss how to setup new NETGEAR Wi-Fi range extender in existing setup, step by step.
We all are aware of the fact that there exist wide range of NETGEAR extenders in market such as N300, AC1200, EX750, AC1900, EX7500, EX7300, EX7000, EX6400, EX8000, EX6200, EX6920, EX6920, EX6100, EX6150, EX6120, EX6000, EX3800, EX3700, EX3920 and EX2700, among which user can choose as per his/her setup requirement.
Steps involved in setting up these wide range of extenders remains almost same, with slight differences.
So let’s get started with our discussion.
But firstly, before initiating extender setup process, user must take consideration of certain facts, so that unwanted troubles can be avoided, which can get arisen during installation process. These important facts are:
In case otherwise, you are advised to follow manual method of installation.
After taking note of these points, you can proceed for your new extender setup.
In this article we are going to elaborate on procedure for new Nighthawk EX7000 AC1900 Wi-Fi range extender setup.
By apply these same steps you can setup any other NETGEAR extender also. Link of some of these new extender setups will be provided in the end of this article.
Nighthawk EX7000 AC1900 WiFi range extender is capable to deliver dual band WiFi signal up to 1900 Mbps. Its dual band character makes it capable to use NETGEAR’s most special feature that is FastLane technology.
EX7000 AC1900 extender is one among most advanced extenders, provided by NETGEAR. Thus are compatible to work with 802.11 a/b/g/n/ac WiFi devices.
User is provided with two methods to launch new Nighthawk EX7000 AC1900 WiFi range extender setup. Steps involved in both of these methods are as discuss below:
1. Wi-Fi Protected Setup(WPS) method:-This method is also named as Push N Connect method. Reason stated for this is by just pressing a button (which is WPS button) user becomes able to connect his/her extender with network router.
This Push N Connect feature makes this method much easier than that of manual method, in which user need to manually perform various steps to establish connection between router and extender.
But before proceeding with WPS method, user must have to ensure that his/her router is WPS enabled.
After ensuring the same, next step include:
By this Router Link LED will get lit up. This indicates that your extender and router has got connected.
Now you can place it at a spot where you want to end the issue of dead spots, with the help of Router Link LED.
Once finding adequate position to place this newly setup extender, power on it.
Once the extender device gets powered on, you can connect any client device to the extender’s network.
For this go to available wireless networks list which you can manage to get by going to Wireless Network Manager. Then do select a network named same as your home network but having _EXT along with the name.
Once you select the network, you will be asked to enter the password. Here you will be required to password same as your home network has.
That’s it. Your client device gets connected with extender’s network.
What if you want to change credentials for your extender?
In that case you will be required to login www.mywifiext.net setup page.
To login local webpage, you will be required to enter credentials which are:
Then select Setup option and then Wireless Setting.
Here you can change various wireless settings of your extender. Once you are done with it, do hit on Apply button.
By this, link between your client device and extender network will get lost. This is because of changed wireless settings. To re-establish the link, you will be required to connect with extender network using new settings that you had made.
2. Manual method: - There are many names by which we usually call this method such as www.mywifiext.net setup wizard, NETGEAR setup wizard, NETGEAR Genie setup and so on.
This method has one major advantage over WPS method and that is this method can be used in all type of setups.
In this method firstly you need to establish link between extender and any client device such as computer or laptop.
This link can be established either by using Ethernet cable i.e. by wired mode or by Wi-Fi signal that is by wireless mode.
Once link gets established successfully, do launch web browser on your client device.
By this you will be prompted to local webpage of NETGEAR. But if in any case it does not happen, then you will be needed to enter www.mywifiext.net in the address bar of the browser.
You can also use IP address i.e. 192.168.1.250 to launch www.mywifiext.net setup page.
Then you will be asked to enter credentials to login which are:-
Username to login admin
Password to login password
By this NETGEAR genie will get launched.
Now click on New extender setup.
Then follow simple steps that get displayed on your screen and that’s it. Your new extender setup gets completed.
Now you can place your extender at any position where you are having issue of poor connectivity, with the help of Router Link LED.
These were all steps involved in new Nighthawk EX7000 AC1900 WiFi range extender setup.
Steps involved in setting up other NETGEAR WiFi range extenders are almost same as that of EX7000 extender setup.
Link for setting up some of these extenders are listed below. User can take help from them to complete their new extender setup without any hurdle.